Pincoder Diagnostics Inc.  Version 2024.01.24.1417_beta

PINCODER ADAPTER SETTINGS FOR THIS RELEASE
==============================================================================================

The DIP switch settings are from left (closest to the jumpers) to right (at the board edge). A
"-" means the DIP switch should be set to 0 (down), and a "1" means it should be set to 1
(up).

!!!
!!!   WARNING: JP1 AND JP2 MUST BE SET THE SAME! If you set JP1 to 1-2 then you must also set
!!!   JP2 to 1-2. Failure to do so may damage your machine and/or this adapter.
!!!

Be sure to read the documentation for the system you are troublshooting as the notes for a
test may differ slightly depending on the system they are intended for.

  | ROM GROUP: Williams/sys346/2K
  | GAMES: Hot Tip, Lucky Seven, World Cup, Contact, Disco Fever, Pokerino, Phoenix, Flash, Stellar Wars, Tri-Zone, Time Warp, Gorgar, Lazer Ball, Firepower, Blackout, Scorpion
  | ================================================
  | JP1   JP2   DIP SWITCHES   ROM NAME
  | ----  ---   ------------   ---------------------
  | 1-2        --------     01a-leds
  | 1-2        -------1     01b-bus
  | 1-2        ------1-     01c-transceivers
  | 1-2        ------11     02-blanking
  | 1-2        -----1--     03-cmos-IC19-PATT256
  | 1-2        -----1-1     04-ram-IC13-PATT128
  | 1-2        -----11-     04-ram-IC16-PATT128
  | 1-2        -----111     05-displays
  | 1-2        ----1---     06-switches
  | 1-2        ----1--1     07-bounce
  | 1-2        ----1-1-     08-interrupts
  | 1-2        ----1-11     09-lamps
  | 1-2        ----11--     10-solenoids
  | 1-2        ----11-1     11a-sounds
  | 1-2        ----111-     11b-sounds
  | 1-2        ----1111     12-flippers
  | 1-2        ---1----     clear_cmos
  | 1-2        ---1---1     edit_cmos
  | 1-2        ---1--1-     init_cmos
  | 1-2        ---1--11     pullups
  | 
  | 
  | 
  | ROM GROUP: Williams/sys6a/2K
  | GAMES: Alien Poker, Algar
  | ================================================
  | JP1   JP2   DIP SWITCHES   ROM NAME
  | ----  ---   ------------   ---------------------
  | 1-2        ---1-1--     01a-leds
  | 1-2        ---1-1-1     01b-bus
  | 1-2        ---1-11-     01c-transceivers
  | 1-2        ---1-111     02-blanking
  | 1-2        ---11---     03-cmos-IC19-PATT256
  | 1-2        ---11--1     04-ram-IC13-PATT128
  | 1-2        ---11-1-     04-ram-IC16-PATT128
  | 1-2        ---11-11     05-displays
  | 1-2        ---111--     06-switches
  | 1-2        ---111-1     07-bounce
  | 1-2        ---1111-     08-interrupts
  | 1-2        ---11111     09-lamps
  | 1-2        --1-----     10-solenoids
  | 1-2        --1----1     11a-sounds
  | 1-2        --1---1-     11b-sounds
  | 1-2        --1---11     12-flippers
  | 1-2        --1--1--     clear_cmos
  | 1-2        --1--1-1     edit_cmos
  | 1-2        --1--11-     init_cmos
  | 1-2        --1--111     pullups
  | 
  | 
  | 
  | ROM GROUP: Williams/sys7/4K
  | GAMES: Barracora, Black Knight, Cosmic Gunfight, Defender Pinball, Firepower II, Hyperball, Joust Pinball, Jungle Lord, Laser Cue, Pharoah, Solar Fire, Time Fantasy, Varkon, Warlok
  | ================================================
  | JP1   JP2   DIP SWITCHES   ROM NAME
  | ----  ---   ------------   ---------------------
  | 2-3        --1-1---     01a-leds
  | 2-3        --1-1-1-     01b-bus
  | 2-3        --1-11--     01c-transceivers
  | 2-3        --1-111-     02-blanking
  | 2-3        --11----     03-cmos-IC19-PATT256
  | 2-3        --11--1-     04-ram-IC13-PATT1024
  | 2-3        --11-1--     04-ram-IC16-PATT1024
  | 2-3        --11-11-     05-displays
  | 2-3        --111---     06-switches
  | 2-3        --111-1-     07-bounce
  | 2-3        --1111--     08-interrupts
  | 2-3        --11111-     09-lamps__ONLY__hyperball
  | 2-3        -1------     09-lamps__ONLY__standard
  | 2-3        -1----1-     10-solenoids__ONLY__hyperball
  | 2-3        -1---1--     10-solenoids__ONLY__standard
  | 2-3        -1---11-     11a-sounds
  | 2-3        -1--1---     11b-sounds
  | 2-3        -1--1-1-     12-flippers
  | 2-3        -1--11--     13-alphanumeric__ONLY__hyperball
  | 2-3        -1--111-     clear_cmos
  | 2-3        -1-1----     edit_cmos
  | 2-3        -1-1--1-     init_cmos
  | 2-3        -1-1-1--     pullups

SUPPORT
==============================================================================================

For help on using the ROM images please see:

  | https://pinside.com/pinball/forum/topic/new-williams-system-6-in-game-test-roms

Thank you again for your support!

Pincoder Diagnostics Inc. Version 2024.01.24.1417_beta
